Zooz ZEN04 700 Series Z-Wave Plus Smart Plug

• Z-Wave control: Add Z-Wave to your lamps or small appliances and enjoy the convenience of scheduling and smart rules for an elevated daily routine (up to 15 A resistive load; no dimming control); Z-Wave hub required (sold separately); scroll down for compatibility.
• Power Monitoring: Track energy use and save money based on real time data from your smart home.
• 700 series chip: Equipped with SmartStart and S2 Authenticated Security, the device incorporates the latest safety feature of the Z-Wave protocol, making your network more reliable and secure.
• Signal Repeater: Boost the signal of your network with extra range from the plug. It acts as an extender to all of your Z-Wave devices for better communication speed and lag-free wireless experience.
• Hub compatibility: This device will be recognize by most Z-Wave Plus hubs but only the open systems support it fully, including advanced setting access: Z-Box Hub, Home Assistant (Z-Wave JS), Hubitat, HomeSeer, Ezlo Plus, Ezlo Secure. It works with SmartThings when a custom edge driver is installed (get it from Zooz support).
• 5-year warranty (when registered) and lifetime tech support
  
• Check out ZEN04 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.

WORKS WITH

• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings available)
• ADT Pulse (no advanced settings available)
• Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard)
  
• Ezlo Secure (select "Generic Z-Wave device" from the Device
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer
• Hubitat
• Indigo
• ISY994Zw
• Jeedom
• openHAB
• Ring (no power consumption info or advanced settings - on/off control only)
• SmartThings (register your product here to access the custom lua driver for advanced functionality)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Signal Frequency: 908.42 MHz
• Power: 110-120 V AC, 60 Hz
• Maximum Load: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors.
• Z-Wave Range: Up to 300 feet line of sight
• Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only 

NOTE: Check Wattage first: DON'T exceed 150 W of LEDs or 960 W incandescent (15 A resistive loads). Use with small motors under 1/3 hp only.