Apple official website recommended.
PRODUCT DETAILS
- Turn lights on/off from anywhere anytime with Meross app.
- Works with Apple HomeKit, Amazon Alexa, Google Assistant, and SmartThings.
- Create on/off schedules or auto-off timers to work automatically.
- LED indicator helps find the switch easily even at night.
- Works with the Wi-Fi you already have. No hub required.
- Neutral wire (white wire) required.
- Apple HomeKit website listed.
BENEFITS
- Neutral Wire Required: Please ensure your electric box has a neutral wire(in white colour) before purchasing Smart Light Switch. If you are not sure, please take a photo of the inner part of your electric box and send it to us. We can check it for you timely.
- Remote Control: To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Remember that once your HomeKit bridge is set up, it must be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely.
- Voice Control: Compatible with Apple HomeKit, Apple Watch, Siri, Carplay, Amazon Alexa, Google Assistant and SmartThings. You can give simple voice commands to turn on/off the devices that are connected to the smart light switch. "Hey, Siri, turn off the living room light." All data is securely transmitted and stored using AWS servers in the US.
- Easy to Install: Less than 15 min installation. Works in a single-pole setup only(Not 3-way). The smart switch fits your existing 1/2/3/4 gang standard-size Decora/GFCI faceplate. The smart switch works with 2.4GHz Wi-Fi only, does NOT support 5GHz Wi-Fi, and no hub is required.
- Schedule and Timer Setting: Meross light switch supports turning the on and off the light automatically. The added benefit is saving energy when lights are not needed or left on by accident. Support sunrise and sunset setting.
WORKS WITH
PRODUCT SPECIFICATION
| Input: |
90~125V~, 50/60Hz |
| Output: | 400W Max. for INC 150W Max. for CFL&LED |
| Button: |
1 x On/Off Button
Press and hold for 5 seconds to initiate the factory reset process
|
| LED: | 1 x Status LED |
| Dimensions (W x D x H): | 1.7 x 1.5 x 4.1 in. (without wall plate) 2.8 x 0.2 x 4.7 in. (wall plate) |
| Antenna: | One internal antenna |
| Wireless Standards: | IEEE 802.11 b/g/n, 2.4GHz, 1T1R |
| Wireless Security: |
Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
*Does not support Enterprise Wi-Fi
|
| Certifications: | US/CA: FCC, IC, ETL |
| Package Contents: |
1 x Smart Wi-Fi indoor/outdoor plug, 1 x User Manual |
| System Requirements: |
Smartphone running iOS 10 * or later,
Android 6.0 or later
Existing Wi-Fi network
*HomeKit version requires iOS 13.0 or later
|
| Environment: |
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
|
FAQS
What should I do when my Meross app cannot control the added wall switch?
You can troubleshoot in the following ways:
- Check the Internet connection of the home Wi-Fi.
- Make sure your home Wi-Fi password has not been changed.
- Do not use a metal faceplate on the wall switch, as that will reduce the Wi-Fi signal.
- Restart the switch by pressing the restart button.
- If all other methods fail, press and hold the power button for 5 seconds to restore factory settings, and then try to add again.
RESOURCES
Download the Manual for MSS510HK, Single Pole Smart Light Switch (PDF) here.