PRODUCT HIGHLIGHTS
- Built-in an 800 series chip. This Z-Wave plug offers better signal coverage than ever and faster communication, with S2-authenticated security and SmartStart for effortless pairing. Extend the wireless coverage up to 1300ft if your hub supports Long Range.
- The Z-Wave Dimmer supports dimming from 1% to 100% brightness. The lights connected to the Z-Wave dimmer plug can be adjusted to the brightness of that ideal ambiance.
- Easy to Set Up and High Security. SmartStart pre-programmed Z-Wave outlet switch only needs to be scanned, and the button pressed 3 times to add devices (less than 1 min). The high security of S2 ensures your privacy and makes it difficult for hackers to attack.
- Wireless and Voice Control: Connect the Z-Wave plug to the Z-Wave hub (sold separately), then use an app to control it remotely via the hub. Voice control it by saying "Adjust light to 75% brightness. Compatible with Alexa and Google Assistant(hub required)
- Timer Schedule: Support timer and schedule setting. Allow the Z-Wave dimmer plug to turn on or off automatically, or adjust to a specific brightness at a specific time.
FEATURES
- Z-Wave on/off + dimmer control.
- Grounded 3-wire power connection for safety.
- Remember and restore the on/off status after a power failure.
- Built-in Z-Wave Plus signal repeater to extend network range,
- S2 security, and an 800 Z-Wave chip for reliable wireless communication.
- Work with all certificated Z-Wave controllers.
- Support Long Range.
WORKS WITH
- SmartThings,
- Vera, Wink,
- Fibaro, Homeseer,
- Ring,
- 2GIG,
- Hubitat (change device type).
-
ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub).
- CANNOT connect directly with ECHO PLUS！
SPECIFICATIONS
- Region: US/CA/MX
- Power: 125VAC 60Hz
- Z-Wave Range: Up to 300 feet line of sight, (or up to 1300 ft with Long Range enabled)
- Z-Wave Frequency: 908.42 MHz, FCC & ETL listed
- Maximum Loads: 200W Incandescent 100W, Dimmable CFL/LED
- Dimensions: 1.46" tall, 2.52" wide, 1.18" deep
-
Temperature Range: 32° F~104° F
- Installation: Indoor use in a dry location only
RESOURCES
Download the Manual for MP31ZD here