PRODUCT HIGHLIGHTS
- Z-Wave control: Add Z-Wave to your lamps or small appliances and enjoy the convenience of scheduling and smart rules for an elevated daily routine (up to 15 A resistive load; no dimming control); Z-Wave hub required (sold separately); scroll down for compatibility.
- Power Monitoring: Track energy use and save money based on real time data from your smart home.
- 700 series chip: Equipped with SmartStart and S2 Authenticated Security, the device incorporates the latest safety feature of the Z-Wave protocol, making your network more reliable and secure.
- Signal Repeater: Boost the signal of your network with extra range from the plug. It acts as an extender to all of your Z-Wave devices for better communication speed and lag-free wireless experience.
- Hub compatibility: This device will be recognize by most Z-Wave Plus hubs but only the open systems support it fully, including advanced setting access: Z-Box Hub, Home Assistant (Z-Wave JS), Hubitat, HomeSeer, Ezlo Plus, Ezlo Secure. It works with SmartThings when a custom edge driver is installed (get it from Zooz support).
- 5-year warranty (when registered) and lifetime tech support
- Check out ZEN04 Frequently Asked Questions
NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and configuration for you to take advantage of this feature.
WORKS WITH
- Z-Box Hub (recommended for Zooz products)
- 2GIG (no advanced settings available)
- ADT Pulse (no advanced settings available)
-
Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard)
- Ezlo Secure (select "Generic Z-Wave device" from the Device
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant (Z-Wave JS)
- HomeSeer
- Hubitat
- Indigo
- ISY994Zw
- Jeedom
- openHAB
- Ring (no power consumption info or advanced settings - on/off control only)
- SmartThings (register your product here to access the custom lua driver for advanced functionality)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
SPECIFICATIONS
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 110-120 V AC, 60 Hz
- Maximum Load: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors.
- Z-Wave Range: Up to 300 feet line of sight
- Dimensions: 1.5" tall, 2.6" wide, 1.14" deep
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
NOTE: Check Wattage first: DON'T exceed 150 W of LEDs or 960 W incandescent (15 A resistive loads). Use with small motors under 1/3 hp only.
RESOURCES
Download the user manual for the ZEN04 here.