Apple official website recommended.
PRODUCT DETAILS
- Meross HomeKit Hub is needed for installation.
-
Works with Apple HomeKit, Amazon Alexa, and is compatible with SmartThings.
- Voice Access: Know the status of the device via HomePod / Siri.
- Alert: Your Meross app or Apple Home app will receive an alert instantly when the alert condition is detected.
- Low Power Consumption: Up to 18 months lifespan with the built-in battery.
- Automation: Set triggers to control other Meross devices in the Meross app.
- Control Up to 16 Devices: One hub can control 16 Meross devices (sensors, detectors, thermostat valves) simultaneously.
Smart Wi-Fi Hub
MSH300HK
- Compact housing, size 5.8 x 4.1 x 2.1 cm.
- Support both 802.11n Wi-Fi.
- Bridge your Meross low-power-consumption smart devices, such as smart sensors and smart thermostat valves, to the Internet.
- Works with the Wi-Fi you already have.
WORKS WITH
PRODUCT SPECIFICATION
|
Battery: |
CR2450 Battery, replaceable |
| Sensor Dimensions (Dia × H): |
2.24 × 1.22 × 0.59 in. and 1.10 × 0.61 × 0.43 in. |
|
Hub Dimensions (W × D × H): |
59 × 41 × 21 mm (2.3 × 1.6 × 0.8 in. |
| Wireless Standard: | Smart Hub: 802.11 b/g/n 2.4GHz Wi-Fi 433MHz Smart Door and Window Sensor: 433MHz |
| Certifications: |
FCC/IC |
| Package Contents: | 1 × Smart Sensor 1 × User Manual 1 × Key Pin 1 × Power Adapter (Kit Version) 1 × USB Cable (Kit Version) 1 × Smart Hub (Kit Version) |
| System Requirements: |
Smartphone running iOS 10 * or later,
Android 6.0 or later
Existing Wi-Fi network
*HomeKit version requires iOS 13.0 or later
|
| Environment: | Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
FAQS
1. You can automate the control of Meross smart switches or smart bulbs by setting Trigger to turn on or off the corresponding lights when the door or window sensor detects that a door or window has been opened.
2. You can protect your privacy and improve your comfort by setting Trigger to automatically close the window shades when the door or window sensor detects that a door or window has been opened.
In addition to this, you can also automate the control of meross devices such as purifiers and thermostats with the MS200.
Yes, this unit has a replaceable battery. It is powered by a DC 3V CR2450 battery.
When the battery runs out, we recommend that you use a Panasonic CR2450 battery as a replacement. In our tests, this will give you a better battery life experience.
Yes, you can. Specifically, the following.
If you are using the HomeKit version of the Hub (the Hub has a Setup Code with an 8 as a number), this Hub supports all sub-devices in the Meross app (which needs to be updated to the latest firmware). All sub-devices except MTS100 and MS100 can be used with this Hub for HomeKit functionality.
If you are using the Non-HomeKit version of the Hub (no Setup Code on the Hub), this Hub only supports MTS100, MS100 2 products in the Meross app and does not support HomeKit functionality.
A Meross Smart Hub can support up to 16 devices.
RESOURCES
Download the Manual forSmart Door and Window Sensor Kit, MS200HHK (PDF) here.