FREE SHIPPING ON ALL ORDERS OVER $300! *taxes excluded
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch
  • Load image into Gallery viewer, Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch

Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Wall Switch

Zooz
$49.95
$49.95
$56.95
Sold out

New from the 800 Series by Zooz, the ZEN76 S2 On/Off Switch!

  • Turn your lights on, dim them, or turn them off from the wall dimmer or through Z-Wave
  • NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • What's the difference between the ZEN77 and the ZEN72 model? Read here!
  • TRIAC Dimmer: use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, chandeliers, fans, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
  • Simple Direct 3-Way & 4-Way: Less rewiring for more multi-point control scenarios like 4-ways and 5-ways where load and line are in separate boxes. Use it the same way as the ZEN27 dimmer. Neutral wire required.
  • Replaceable paddles (almond, brown, and black paddle kits available)
  • Small profile (just 1.1" deep) to fit easily in a crowded or shallow box
  • Adjustable LED indicator: choose the color and brightness that works for you!
  • Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
  • Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap*
  • You choose the color and brightness level of the LED indicator*
  • Programmable double tap and single tap for truly customized control*
  • Adjustable ramp rate and maximum/minimum brightness levels*
  • OTA firmware updates for a future-proof device
  • Signal repeater will make your Z-Wave network more reliable
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year extended warranty (register your product here) and lifetime tech support
  • Check out Zooz Light Switches & Dimmers Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

    READ A GUIDE TO ZOOZ SWITCHES HERE!

    Here is a simplified overview of the recommended dimmer models for the most common scenarios (read the full guide above for more details):

    Quick guide to Zooz Z-Wave dimmer models

    INSTALLATION:

    Please follow the manual carefully and refer to the supplied diagrams when installing your Zooz switches. It's recommended that a licensed electrician performs the installation.

    Check for neutral connections BEFORE you buy. A white wire from a 14-3 romex is usually NOT a neutral.

    Zooz ZEN26 wiring diagram

    How to include the 800 Series S2 Dimmer to your smart home hub?

    1. Make sure the dimmer is located within range of your Z-Wave network
    2. Put your Z-Wave controller in inclusion/pairing mode
    3. Tap the upper paddle of the dimmer 3 times quickly to finalize the inclusion process
    4. A new dimmer switch will appear on your controller's device list

     NOTE:  Follow an appropriate diagram from the manual to wire the dimmer in a 3-way or 4-way setting with a regular on/off electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.

    WORKS WITH:

    • Z-Box Hub (recommended for Zooz products)
    • 2GIG (no advanced settings or scene control)
    • Abode
    • ADT Pulse (no advanced settings or scene control)
    • Almond (Securify)
    • Fibaro Home Center 2
    • Fibaro Home Center Lite
    • Home Assistant (Z-Wave JS)
    • HomeSeer
    • Hubitat
    • InControl
    • ISY
    • Ring (no advanced settings or scene control)
    • SmartThings Hub (register your product here to access the custom lua driver for advanced functionality)
    • Wink and Wink 2

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

      PRODUCT SPECIFICATIONS:

      • Z-Wave Region: US/MX/CA
      • Power: 120 VAC, 60 Hz
      • Maximum Load: 100 W LED, 300 W incandescent
      • Z-Wave Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
      • Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
      • Operating Temperature: 32-104° F (0-40° C)
      • Installation: Indoor use only

      RESOURCES:

      Download the user manual for Zooz ZEN77 800 Series Z-Wave Long Range S2 Dimmer Switch here.

      Zooz Light Switches & Dimmers Frequently Asked Questions

      Additional Wiring Diagrams

      Advanced Settings

      Back to Switches

      ⏳ Sale ends in {timer}