ZW854 LR 800 Series Z-Wave Plus Water Valve Actuator

PRODUCT HIGHLIGHTS

• Automatic shut-off: connect the ZW854 to your Z-Wave hub to automatically close your water valve when a compatible water sensor detects a leak, providing immediate protection against flooding and water damage. water sensors
  
• Suitable for 1"-1.25" pipe sizes: please check your water valve for compatibility first. Includes a rubber ring for installation on pipes smaller than 1"
• Indoor or outdoor installation: install the actuator outdoors if this is where your water main is.
• DIY installation: wrench key included
• Manual operation: Front-press clutch button to allow manual opening or closing the valve 
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• New 800 series Z-Wave chip: faster, more secure, and reliable wireless communication with greater range than ever 
• SmartStart Support: After powering on, SmartStart is auto-active for easier and safer pairing
  
• 5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately. You need a security-enabled controller to get the most out of the product.

HOW IT WORKS

Whether it’s an emergency or just for general safety and convenience, the Water Valve Actuator offers an easy approach to smart home solutions. When connected to your Z-Wave hub, you can control your water valve wirelessly and manually from any mobile device.

It also supports advanced home automation for added protection. Link this valve actuator with other Z-Wave devices, like a flood sensor, and the valve will automatically close when it detects water. 

The built-in Z-Wave signal repeater extends and strengthens your Z-Wave network range, ensuring fast, reliable connections thanks to its 800 series chip technology.

HOW TO INSTALL

It takes a few minutes to install the valve on the compatible water/gas valve by using the included wrench key.  A detailed installation procedure is described in the user guide.

SPECIFICATIONS

• Valve Requirements: DN15, DN20, DN25(1/2",3/4",1")
• Valve Pressure: 1.6MPa
• Torque: 30-60 Kg.cm
• Valve Opening/Closig Time: 5-10 s
• Installation Requirements: At least 1.5" clearance between the pipe and the wall, depending on the water valve orientations
• Z-Wave Region: US / CA / MX
• Z-Wave Chip: 800 series
• Z-Wave TX Power: Max: 14dBm
• Power: 12 V DC (1 A) power supply (included)
• Power Cord Length: 3 m
• Temperature Sensor Range: -40° – 257° F
• Color: Black or White
• Wireless Range: 40m (Indoor) /100m (Outdoor)
• Relative Humidity: Up to 95% non-condensing
• Operating Temperature: 14-122°F (-10-50°C)
• Dimensions: 74.0 mm x 74.0 mm x 83.5 mm
• Installation: Indoor or outdoor use (IP66)

WORKS WITH