Description
ZL-WD-100 is designed to provide easy on/off and dimming control of incandescent, and dimmable florescent and LED lighting. The dimmer replaces a standard in-wall light switch or dimmer and with the companion ZL-WA-100 Accessory Switch supports wired 3, 4 and 5-way circuits. The ZL-WD-100 is a rock solid performer and supports many optional configurable features such as; on/off orientation, ramp up and down times, soft on and off, and dimmer sensitivity for just the right feel. Multi-tap scene control is also supported. Simply install, add to your Z-Wave network and enjoy complete Z-Wave control.
Product Features:
- Works with incandescent and most dimmable florescent (CFL), or LED lighting
- Supports S2 and SmartStart for easy, secure inclusion
- Scene control capable, supports double and triple tap control
- Instantly reports manual status change to controller
- Single, configurable, LED indicates status
- Configurable orientation, LED right or left of paddle
- Fits standard single wall plate
- Works with ZL-WA-100 accessory switch for wired multi-way circuits
The WA-100 switch is intended to be used only with Z-Wave certified In-Wall units such as WS-100 and WD-100 modules and any switches in a home. Basic connection is made by a hard wire between the 2 Traveler terminals. Up to 3 units of WA-100 can be added to a particular light switch to form up to a 5-way association. The WA-100 carries no live (Line) power and it’s not transmitting or receiving any RF signal.
Features:
- Mounting: Standard J box / Single gang
- 3-Way Auxiliary switch that works with WS100 wall switch or WD100 wall dimmer
- Fits standard wall plate
- Up to Three WA100 Auxillary switches (5 way) can be used with one in wall switch or dimmer
- When used with WD100 dimmer, WA100 can also be used to control dimming
WD 100 Technical Specification:
Electrical
- Max Load 600W Incandescent, 150W CFL/LED
- Input: 120VAC, 60Hz, 15A, Neutral required
- Operating Temp. Range: 32-104°F (0-40°C)
- UL and cUL listed
Z-Wave
- US Region, 908.4MHz, 916MHz
- Complies with FCC Part 15, Class B
- Z-Wave PLUS, S2 Security, SmartStart
- Z-Wave signal repeater
- Network-Wide-Inclusion
- Over-The-Air (OTA) firmware upgrade capable
- Configurable parameters supported
WA 100 Technical Specification:
- Model: WA-100
- Normal operating temperature: 77F (25C)
- For indoor use only
- Z-Wave is registered trademark of Sigma Design