New from the 700 Series by Zooz, the ZEN74 Toggle Dimmer Switch!
The all new 700 Series switches feature smaller profiles (just 1.1" deep) for an easy fit into smaller/crowded boxes. The 700 Chip includes SmartStart for easier integration, as well as a wider range, faster signal and S2 security.
- On/off and dimming control of your lighting via Z-Wave (hub sold separately)
- NEW 3-WAY & 4-WAY WIRING: Still no add-on and use it in larger set-ups for multi-point control. Wires like the ZEN27 model; always follow the diagram in the manual, do NOT wire like the older ZEN23/ZEN24 switches. Neutral required.
- Use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, fans, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
- NEW in 700 series: smaller in the back (just 1.1" deep) to easily fit in shallow and crowded boxes; optimized antennae placement for stronger signal
- NEW 700 chip: the latest S2 security, SmartStart for instant inclusion, and fast wireless communication with supreme Z-Wave coverage!
-
Night Light Mode: press and hold the toggle down when dimmer is off to turn the light on to low brightness
- Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap*
- Multicolor LED indicator to guide you through the inclusion, exclusion, and reset process (LED indicator for diagnostic purposes only, not visible with the wall plate on)
-
Programmable double tap and single tap for truly customized control*
-
Adjustable ramp rate and maximum/minimum brightness levels*
-
OTA firmware updates for a future-proof device*
- Use a standard-size wall plate for single gang installations (wall plate not included)
- 5-year warranty and lifetime tech support
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
NOTE: Z-Wave gateway controller required - sold separately.
Download the Manual for ZEN74 HERE (PDF)
WORKS WITH:
- 2GIG (no advanced settings or scene control)
- Abode (no advanced settings or scene control)
- ADT Pulse (no advanced settings or scene control)
- Almond (Securify) (no advanced settings or scene control)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant (Z-Wave JS)
- HomeSeer
- Hubitat
- InControl
- ISY
- openHAB
- Open Z-Wave
- Ring (no advanced settings or scene control)
- SmartThings Hub (custom device handler needed for scene control and advanced settings, download here)
- Wink and Wink 2 (no advanced settings or scene control)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
TECHNICAL SPECIFICATIONS:
- Z-Wave Frequency: 908.42 MHz (US)
- Power: 120 VAC, 60 Hz
- Maximum Load: 150 W LED, 300 W incandescent (don't connect to tube lights, fans, or switched receptacles)
- Z-Wave Range: Up to 200 feet line of sight
- Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
- Operating Temperature: 32-104° F (0-40° C)
- Installation: Indoor use only