-
PRODUCT HIGHLIGHTS
-
- Beta release: you may need to update the firmware in the near future to get the full functionality of your device; the device may not be fully compatible with your hub at the time of this release.
- Single outlet with on/off Z-Wave control for outdoor Holiday lights, patio lights, small pumps or motors under 1/3 hp, and other appliances under 15 A resistive power (no dimming control)
- Weather and impact-resistant housing withstands damp or wet conditions (IP65 rated)
- Angled plug for optimal outlet placement created with outdoor receptacles in mind
-
700 series Z-Wave chip: longer range and quicker reaction time
- SmartStart and S2 authenticated security for a truly secure smart home
- LED indicator for easier inclusion and troubleshooting diagnostics
- Compatible with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances; NOTE: FEIT bulbs are not recommended)
- Built-in signal repeater: helps keep your network reliable, indoors and outdoors
- 5-year warranty (when registered) and lifetime tech support
NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub/controller needs to support advanced settings and central scene programming for you to take advantage of this feature.
HOW IT WORKS
The Outdoor Smart Plug enables wireless on/off control of lighting fixtures (no dimming capability) and small appliances. Add the plug to your hub and enjoy the convenience of scheduling or triggering your outdoor lights based on motion and other activities. Save energy and time with automated control. The plug is compatible with incandescent and high-quality LED bulbs.
The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The plug is angled to keep the second outlet in your receptacle open. The Outdoor Smart Plug is perfect for decorative or seasonal lighting, fountains, and other outdoor plug-in appliances.
Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. You can also disable manual control from the button to make sure the device isn't activated accidentally.
INSTALLATION
Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load.
How to include the Outdoor Smart Plug to your smart home network?
1. Insert the Smart Plug into a standard 120 V receptacle
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
4. A new on/off device will appear on your hub's device listHow to include the Smart Plug to your smart home network?
1. Insert the Smart Plug into a standard 120 V receptacle
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
4. A new on/off device will appear on your hub's device listWORKS WITH
- 2GIG (no advanced settings available)
- ADT Pulse (no advanced settings available)
-
Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard list)
- Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard list)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant (Z-Wave JS)
- HomeSeer
- Hubitat
- Indigo
- ISY994Zw
- Jeedom
- openHAB
- Ring (no power consumption info or advanced settings - on/off control only)
- SmartThings
- Vera
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
SPECIFICATIONS
- Z-Wave Frequency: 908.42 MHz (US)
- Power: 120 VAC, 60 Hz
- Maximum Loads: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors
- Z-Wave Range: Up to 300 feet line of sight
- Dimensions: 3.25" tall, 2.25" wide, 1.5" deep
- Cord Length: 6.5"
-
Operating Temperature: 32-104° F (0-40° C)
- Installation: Indoor our outdoor use, IP65 rated
-
RESOURCES
Download the user manual for the ZEN05 here.