Apple official website recommended.
PRODUCT DETAILS
- Compact 2 in 1 plug and you can also stack two plugs in the same outlet.
- Turn devices on/off anywhere anytime with the Meross app.
- Works with Apple HomeKit, Amazon Alexa, Google Assistant, SmartThings.
- Create on/off schedules or auto-off timers to work automatically.
- Works with the Wi-Fi you already have. No hub required.
- Apple HomeKit website listed.
BENEFITS
- Compact 2-in-1 Design: Meross 2 in 1 smart plug compatible with Alexa smart plugs allow you to get 2 spaced outlets with one plug. Mini enough but there is a wide place between the two sockets, no interference and more space-saving. It supports max total output of 15A.
- Remote Control: To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Keep in mind that once your HomeKit bridge is set up, it has to be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely.
- Voice Control: Compatible with Apple HomeKit, Apple Watch, Siri, Carplay, Amazon Alexa, Google Assistant and SmartThings. You can give simple voice commands to turn on/off the devices that are connected to the smart plug dual. Just say "Hey Siri, turn off the lamps." All data is securely transmitted and stored using AWS servers in the US.
- Timer Setting: Schedule the smart plugs or set auto-off timer routine to work automatically as needed, saving energy and money. Your data is securely transmitted and stored using AWS servers in the US.
- Easy Setup & Reliable Connection: Simply download the App, power it on and configuration then you can enjoy the convenience of our products. And they have a longer Wi-Fi connection range and lower offline rate. FCC & ETL Certified.
WORKS WITH
PRODUCT SPECIFICATION
| Input: | 120V~, 60Hz |
| Output: | 15A Max. |
| Energy Monitor: | No |
| Button: |
2 x On/Off Button
Press and hold for 5 seconds to initiate the factory reset process
|
| LED: | 1 x Status LED |
| Dimensions: | 4.4 x 1.8 x 1.3 in. (excluding plug pins) |
| Antenna: | One internal antenna |
| Wireless Standards: | IEEE 802.11 b/g/n, 2.4GHz, 1T1R |
| Wireless Security: |
Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
*Does not support Enterprise Wi-Fi
|
| Certifications: | US/CA: FCC, IC, ETL |
| Package Contents: | 1 x Smart Wi-Fi Plug Mini, 1 x User Manual |
| System Requirements: |
Smartphone running iOS 10 * or later,
Android 6.0 or later
Existing Wi-Fi network
*HomeKit version requires iOS 13.0 or later
|
| Environment: |
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
|
FAQS
What devices can I control with Meross Smart Plug?
You can control any small appliances according to the specifications of the Meross Smart Plug. The following is the maximum power of some typical devices supported by Meross Smart Plug.
Coffee pot: 800W, Lamp: 235.2W, LCD: 2 70W, Humidifier: 260W, Toaster: 850W, Tower fan: 50W
How many smart home devices can be controlled by the Meross app?
The Meross app can control an unlimited number of smart home devices.
The status LED is NOT blinking amber and green
Press and hold the power button for 5 seconds, and then wait about 20 seconds until the LED light starts to flash amber and green.
RESOURCES
Download the Manual for MSS120, Smart Wi-Fi Plug Mini (PDF) here.