Zooz ZEN14 700 Series Z-Wave Plus Outdoor Double Plug

• PRODUCT HIGHLIGHTS

• • Beta release:   you may need to update the firmware in the near future to get the full functionality of your device; the device may not be fully compatible with your hub at the time of this release.
  • On/off Z-Wave control for 2 independent devices (up to 15 A resistive load total between 2 outlets; no dimming control)
    
  • Great for holiday lights, small motors under 1/4 hp, and patio lighting
  • Weather-proof housing for safe outdoor use (IP65 rated)
  • Angled plug keeps the second outlet in your receptacle clear
  • 700 series Z-Wave chip: stronger range for faster response time and instant reporting
    
  • SmartStart and S2 authenticated security for hacker-proof set-up
  • Compatible with quality LED and incandescent bulbs (don't connect to fans over 3A or large appliances; NOTE: FEIT bulbs are not recommended)
  • Built-in signal repeater: boost your network's speed and range with the 700 series technology
    
  • 5-year warranty (when registered) and lifetime tech support
    

  NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub/controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

      INSTALLATION

Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for LED's, 3A for fans and motors, or 15 A for resistive load COMBINED between the 2 outlets.

How to include the Outdoor Double Plug to your smart home network?
1. Insert the plug into a standard 120 V receptacle
2. Put your Z-Wave controller in inclusion/pairing mode
3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
4. A new on/off device will appear on your hub's device list

• How to include the Outdoor Double Plug to your smart home network?
  1. Insert the plug into a standard 120 V receptacle
  2. Put your Z-Wave controller in inclusion/pairing mode
  3. Click the Z-Wave button on the plug 3 times quickly to finalize the inclusion process
  4. A new on/off device will appear on your hub's device list

  WORKS WITH

  • • Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard)
      
    • Ezlo Secure (select "Generic Z-Wave device" from the Device Wizard)
    • Home Assistant (Z-Wave JS)
      
    • HomeSeer

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

  SPECIFICATIONS

  • Z-Wave Frequency: 908.42 MHz (US)
  • Power: 120 VAC, 60 Hz
  • Maximum Loads: 960W incandescent, 150W LED bulbs, 15A resistive, 1/3 HP fan motors combined between 2 outlets 
  • Z-Wave Range: Up to 300 feet line of sight
    
  • Dimensions: 5" tall, 3.5" wide, 1.75" deep
  • Cord Length: 6.5"
  • Operating Temperature: 32-104° F (0-40° C)
    
  • Installation: Indoor or outdoor use, IP65 rated

          RESOURCES

            Download the user manual for the ZEN14 here.