Product Specifications:
- Turn lights and small appliances on or off locally or with Z-Wave remote control
- The first Z-Wave switch with Direct 3-way Solution - wires to your existing mechanical switch! (neutral required, use in 4-Way only if direct connection to load and line are in the same box)
- Works great as a simple single pole switch or as a remote control switch for your smart bulbs
- Scene Control on select hubs: trigger custom scenarios and control other devices with double tap*
- VER. 4.0: No heat sink tabs for easier in-box fit, same great features
- White (no other color available)
- Immediate status reports to Z-Wave controller when operated manually
- Remembers on/off status after power failure
- Short screws for toggle wall plates and neutral jumper in the box
- Z-Wave Plus guarantees longer range and faster communication
- Great with incandescent, LED, and CFL bulbs (don't use with ballast tube lights or switched receptacles!)
- Connect it with other Z-Wave devices for convenient and secure automation
- Screw terminal installation - Line (Hot), Load, Neutral, and Ground wires required
- Use a standard-size wall plate for single gang installations (wall plate not included) - short screws included for hassle-free set-up
- S2 security and ETL listed to ensure the highest safety and security standards
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input for this feature to work.
Works With
- 2GIG (no advanced settings available)
- ADT Pulse (no advanced settings available)
- Almond (Securify)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant
- HomeSeer
- Hubitat
- InControl
- Indigo
- ISY994Zw
- Jeedom
- OpenHAB
- Open Z-Wave
- Piper (no advanced settings - on/off control only)
- Ring (no advanced settings or scene control)
- SmartThings Hub (custom device handler needed to access advanced settings and scene control, download it here)
- Staples Connect DLink (no advanced settings - on/off control only)
- VeraEdge Z-Wave Gateway Controller (no scene control)
- VeraLite Z-Wave Gateway Controller (no scene control)
- VeraPlus Z-Wave Plus Advanced Home Controller (no scene control)
- Wink and Wink 2
- Zipato Z-Wave Zipabox Smart Home Controller
- Zipato ZipaTile Home Automation Controller
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Technical Details
- Model Number: ZEN23 VER. 4.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Maximum Loads: 960W Incandescent, 150W LED's and CFL's, 1800W (15A) Resistive, 3A for ceiling or exhaust fans
- Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
Resources
Download the installation manual for ZEN23 here.