Product Specifications:
- Manual or remote on/off control and dimming from your mobile device or computer (when included to a Z-Wave gateway controller)
- Direct 3-Way Solution: Wire it with a regular light switch for 2-point control, no need to buy a dedicated switch! (Neutral wire required, on/off control only from slave switch, use in 4-Way only if direct connection to load and line are in the same box)
- VER. 3.0: No heatsink tabs for easier installation, same power rating; night lamp mode: hold down when off to turn the light on to low brightness
- Fully adjustable tamp rate, and more advanced settings*
- White (no other color available)
- Z-Wave Plus with improved 500 chip for faster and safer wireless communication
- Extended LED bulb compatibility - use it with quality dimmable LED's (including Cree, Ecosmart, GE, Philips, Sylvania, Sunco, and others. NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.)
- Based on universal command classes - supported by most Z-Wave controllers
- May be associated and grouped with other Z-Wave devices for advanced home automation
- Built-in Z-Wave signal repeater for a stronger and more reliable network
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input for this feature to work.
Works With:
- 2GIG (no advanced settings available)
- ADT Pulse (no advanced settings available)
- Almond (Securify)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant
- HomeSeer
- Hubitat
- InControl
- Indigo
- ISY994Zw
- Jeedom
- OpenHAB
- Open Z-Wave
- Piper (no advanced settings - on/off control only)
- Ring (no advanced settings or scene control)
- SmartThings Hub (custom device handler needed to access advanced settings and scene control, download it here)
- Staples Connect DLink (no advanced settings - on/off control only)
- VeraEdge Z-Wave Gateway Controller (no scene control)
- VeraLite Z-Wave Gateway Controller (no scene control)
- VeraPlus Z-Wave Plus Advanced Home Controller (no scene control)
- Wink and Wink 2
- Zipato Z-Wave Zipabox Smart Home Controller
- Zipato ZipaTile Home Automation Controller
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Technical Details:
- Model Number: ZEN24 VER. 4.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Maximum Loads: 600W Single-gang, 500W Double-gang, 400W Triple-gang Incandescent, 150W CFL or LED
- Range: Up to 100 feet line of sight
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
Resources:
Download the use manual for ZEN24 here.
Click here for the 3-way diagrams for ZEN24.