New from the 800 Series by Zooz, the ZEN74 S2 Toggle Dimmer Switch!
- On/off and dimming control of your lighting via Z-Wave (hub sold separately)
- NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
- Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
- NEW 3-WAY & 4-WAY WIRING: Still no add-on and use it in larger set-ups for multi-point control. Wires like the ZEN77 model; always follow the diagram in the manual, do NOT wire like the older ZEN23/ZEN24 switches. Neutral required.
- Use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, fans, halogen bulbs, transformers, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
- Improved hardware: smaller in the back (just 1.1" deep) to easily fit in shallow and crowded boxes; optimized antennae placement for stronger signal
-
Night Light Mode: press and hold the toggle down when dimmer is off to turn the light on to low brightness
- Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap*
- Multicolor LED indicator to guide you through the inclusion, exclusion, and reset process (LED indicator for diagnostic purposes only, not visible with the wall plate on)
-
Programmable double tap and single tap for truly customized control*
-
Adjustable ramp rate and maximum/minimum brightness levels*
-
OTA firmware updates for a future-proof device*
- Use a standard-size wall plate for single gang installations (wall plate not included)
- 5-year warranty once registered and lifetime tech support
- Check out Zooz Light Switches & Dimmers Frequently Asked Questions
NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.
NOTE: Z-Wave gateway controller required - sold separately.*Your hub needs to support advanced settings for this feature to be available.
READ A GUIDE TO ZOOZ SWITCHES HERE!
INSTALLATION:
Please follow the manual guidelines and diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.
Check for neutral wires BEFORE purchasing. One white wire from a 14-3 romex is NOT a neutral.
How to include the 800 Series Toggle Dimmer switch to your smart home hub?
1. Make sure the switch is installed within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
4. A new on/off switch will appear on your controller's device list
NOTE: Follow an appropriate diagram from the manual to wire the switch in a 3-way or 4-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.
WORKS WITH:
- (recommended for Zooz products)
- 2GIG (no advanced settings or scene control available)
- Abode
- ADT Pulse (no advanced settings or scene control available)
- Almond (Securify)
- Fibaro Home Center 2
- Home Assistant (Z-Wave JS)
- HomeSeer (with Z-Wave Plus plug-in)
- Hubitat (no advanced settings)
- InControl
- Indigo
- ISY994Zw
- openHAB
- Open Z-Wave
- Piper (no advanced settings - on/off control only)
- Ring (no advanced settings or scene control)
- SmartThings Hub ( to access the custom lua driver for advanced functionality)
- Wink and Wink 2 (no advanced settings or scene control)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
PRODUCT SPECIFICATIONS:
- Z-Wave Region: US / CA / MX
- Power: 120 VAC, 60 Hz
- Maximum Load: 100 W LED, 300 W incandescent (don't connect to tube lights, fans, or switched receptacles)
- Z-Wave Range: Up to 300 feet line of sight (or up to 1300 feet with Z-Wave Long Range)
- Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
- Operating Temperature: 32-104° F (0-40° C)
- Installation: Indoor use only
RESOURCES:
Download the user manual for Zooz ZEN74 800 Series Z-Wave Long Range S2 Toggle Dimmer Switch here.